For a JTM508 enquiry, begin with the production requirement rather than a universal price or maximum speed. The following five checks help JETMECH and your factory define the same machine, options and acceptance basis.
01 · APPLICATION
Confirm that the yarn suits waterjet weaving
Provide the fiber, yarn size, filament construction, twist and preparation details for both warp and weft. Polyester and nylon continuous-filament fabrics are the main starting point; pure cotton or linen should not be specified as standard waterjet applications.
- Fabric sample, construction and end use
- Warp and weft specifications, density and weave repeat
- Required appearance, finished width and edge quality
02 · WIDTH AND WEAVE
Match reed space and shedding to the fabric
Finished width, weaving width and nominal reed space are different specifications. Allow for the agreed selvage and fabric behavior rather than ordering from finished width alone.
The weave repeat and required heald frames guide the shedding choice. Confirm the available mechanism and its scope for the quoted machine; additional complexity is worthwhile only when the fabric plan needs it.
03 · SYSTEMS AND UTILITIES
Review insertion, tension control and the factory
Pump and nozzle selection must suit the weft, width and insertion timing. Let-off, take-up, drive and control also need to match the production task.
Check electrical supply, water source, filtration, drainage, foundation and installation space before ordering. Identify which factory systems are supplied with the machine and which your factory must arrange.
04 · PRICE AND SUPPLY SCOPE
Understand what changes a waterjet loom price
Working width, shedding, insertion configuration, control options and included accessories can change the quotation. Order quantity, packing, freight terms, commissioning and training may also change the total project cost.
Ask for a dated, itemized quotation separating the base loom, options, spare parts and excluded work. Compare suppliers on an equivalent scope before treating a lower headline price as a lower installed cost.
05 · ACCEPTANCE AND SUPPORT
Agree the production basis before placing the order
Record the target fabric, agreed machine scope and acceptance method. Discuss output alongside fabric quality and the operating conditions, rather than using nominal speed as the only measure.
Confirm documentation, operator training, warranty terms and the technical and spare-parts support arrangements. Keep these commitments in the order documents so the commercial and technical teams work from the same baseline.
Request a quotation with a clear configuration
Share your fabric details, required width, weave and planned quantity. JETMECH will discuss the configuration, price factors and supply scope for your project.
